INSTALLATION OF HUMBBSBP2017-A--

BYPASS HUMIDIFIER

Bryant's HUMBBSBP2017-A-- bypass humidifier can be installed on either the supply or return plenum of a forced air system. This unit requires an external bypass duct between the supply- and return-air ductwork.

It is recommended to install the humidifier where it can be easily serviced. If this humidifier is installed with a central cooling system the bypass duct must have a shutoff damper to close during the cooling season. Always install humidifier downstream of an electronic air cleaner.

→ I. INSPECT PACKAGE AND CHECK EQUIPMENT

Inspect the contents of packaged humidifier. File claim with

shipping company prior to installation if shipment is damaged or

incomplete.

The package should contain:

1.

Humidifier and media assembly

2.

Humidistat

3.

Template

4.

6-in. damper

"N" COIL

VERTICAL

BYPASS UNITS

ACCESS

DOOR

DRILL (2) HOLES

IN DUCT

FOR #8 SHEETMETAL

SCREWS

HORIZONTAL

A98367

5.

Owner's Manual

6.

Warranty Certificate

7.

Solenoid valve with bridge rectifier

8.

Transfer tube

9.

Saddle valve assembly with adapter

10.

Three pair of miscellaneous screws

11.

Six sheet metal screws

12.

Foam tape

13.

Water noise reducer (use for water pressure over 60 psi)

14.

Worm clamp for field-supplied drain tube

15.

Humidifier maintenance instruction sticker

16.

Bryant logo label

II.SELECT LOCATION (SEE FIG. 12.)

Humidifier may be installed on either supply or return plenum. If furnace has air conditioning coil, be sure unit does not interfere with coil ends. Remember to provide clearance for maintenance and evaporator pad removal.

III.PREPARE PLENUM OPENING (SEE FIG. 2.)

1.Use template for marking humidifier opening.

2.Tape in place on plenum making sure template is level.

IMPORTANT: For humidifier to operate properly it must be level and mounted on a vertical surface.

3.Drill four 1/8-in. holes in plenum.

4.Cut opening in plenum using heavy solid lines on template as a guide.

IV. MOUNT HUMIDIFIER

1.Attach foam tape on inside of mounting flange.

2.Determine discharge direction.

3.If right-hand discharge is required:

a. Remove side door and media pad assembly.

→Fig. 12ÐInstallation of HUMBBSBP2017-A-- Bypass-Type Humidifier

 

SOLENOID

BROWN

VALVE

ASSEMBLY

PAD

ACCESS

DOOR

A98368

→Fig. 13ÐMounting Solenoid Valve on HUMBBSBP2017-A-- Humidifier

b.Invert unit 180 degrees.

c.Re-install media pad and door.

IMPORTANT: Always ensure pad assembly is in the upright position.

4.Attach solenoid valve to unit housing using two screws in upper mounting holes. (See Fig. 13.) Do not over tighten screws.

Ð7Ð

Page 6 Page 8
Page 7
Image 7
Bryant HUM-56-1 manual Installation of HUMBBSBP2017-A Bypass Humidifier, IV. Mount Humidifier, Ð7Ð
Page 6 Page 8

HUM-56-1 specifications

The Bryant HUM-56-1 is a cutting-edge heating, ventilation, and air conditioning (HVAC) unit that has garnered attention in both residential and commercial sectors for its advanced features and efficient performance. Designed to provide optimal climate control, the HUM-56-1 incorporates several innovative technologies that set it apart from traditional HVAC systems.

One of the standout features of the Bryant HUM-56-1 is its high-efficiency design. The unit boasts an impressive Seasonal Energy Efficiency Ratio (SEER) rating, which indicates its ability to deliver maximum cooling with minimal energy consumption. This efficiency translates into lower utility bills and a reduced carbon footprint, making it an environmentally conscious choice for homeowners and businesses alike.

The HUM-56-1 employs advanced smart technology, including Wi-Fi connectivity and compatibility with smart home systems. This allows users to monitor and control their HVAC system remotely via mobile devices, providing convenience and flexibility. The unit also features programmable settings that enable users to customize their indoor climate according to their schedules, further enhancing energy savings and comfort.

Another key characteristic of the HUM-56-1 is its quiet operation. Equipped with sound-dampening features, the unit minimizes noise levels, ensuring a peaceful indoor environment. This is particularly beneficial for residential applications where noise disruption can impact daily life.

In terms of air quality management, the HUM-56-1 is designed to optimize indoor air quality. The unit is compatible with advanced filtration systems that remove allergens and pollutants from the air, making it an excellent choice for allergy sufferers. Additionally, the system’s ventilation capabilities ensure fresh air circulation, promoting a healthier living space.

Durability is a crucial aspect of the Bryant HUM-56-1. Constructed with high-quality materials, the unit is built to withstand various environmental conditions, ensuring longevity and reliable performance. Bryant also backs the HUM-56-1 with a comprehensive warranty, highlighting their commitment to quality and customer satisfaction.

Overall, the Bryant HUM-56-1 stands out in the HVAC market due to its efficiency, smart technology integration, quiet operation, enhanced air quality features, and durable construction. These characteristics make it a preferred choice for those seeking a reliable and effective climate control solution. Whether for residential or commercial use, the HUM-56-1 is poised to deliver outstanding performance and comfort all year round.
Top Page Image Contents