![](/images/new-backgrounds/1139512/13951233x1.webp)
To switch from pulse to tone dialling
If you are connected to a pulse dialling exchange, you can still use services such as phone banking that require tone dialling.
KEYPAD Call the telephone number you require in pulse mode as usual.
When you have been connected, press the ✱ button on the keypad to set your telephone to tone dialling for the duration of the call.
When you hang up, your Freestyle 1025 will automatically switch back to pulse dialling.
To page the handset
To insert a pause
With some switchboards, after dialling the access code you may have to wait for a moment while the switchboard picks up an outside line. If so, press
Redial the REDIAL button to insert a 2.5 second pause before keying in the telephone number.
To use the recall button
RThis button signals either time break recall or earth recall depending on the setting of the dialling mode. If you are connected to a PBX (Private Branch Exchange), contact your PBX supplier for further information.
To set the dialling mode
USING YOUR PHONE
Page
Page
If you misplace the handset, you can use PAGE to find it again.
Press the PAGE button on the base. The handset will beep. The IN USE light on the base flashes.
Stop the handset beeping by pressing the PAGE button again
or
the TALK button on the handset. (Please note: pressing the TALK button will cut off the line, you will then need to put the handset back onto the base unit.)
Quickdial
1
Play
AB
2C
Quickdial
Press the QUICKDIAL button during standby mode.
Press the ✱ button.
Press 1 for Tone dialling.
Press 2 for Pulse dialling.
Press the QUICKDIAL button to finish the setting (you will hear a confirmation tone). If no instruction is received during this process within 8 seconds, there will be a beep and the process will be cancelled before returning to standby mode.
13