BT 1025 manual Transferring calls between handsets, Basic use of Freestyle additional handsets

Models: 1025

1 47
Download 47 pages 33.25 Kb
Page 33
Image 33

Basic use of Freestyle additional handsets

NOTE

Like all cordless phones, the Freestyle

additional handset must be charged for 24 hours

before initial use.

Basic operation of additional handsets is the same as that of your Freestyle 1025 handset.

NOTE

If you do not hear a dialling tone after pressing the TALK button, wait a few seconds. On a few exchanges, there may be a delay.

To end a call

Press the TALK button or replace the handset.

NOTE

You cannot control the answering machine from the 90/130/1025/1200 additional handset, and it does not have the call screening facility.

The handset range is up to 200 metres from the base unit in ideal conditions. If you start to go out of range while using the phone, you will hear warning beeps. If you do not come back in range, your call will be disconnected.

Transferring calls between handsets

While on a call (ie. in talk mode):

Secrecy Press the SECRECY button.

Enter the number of the handset you want to transfer the call to. The specified handset will ring.

To answer the call, press the TALK button.

ADDITIONAL HANDSETS

To make a call

Lift the handset off the charger.

Press the TALK button. The IN USE light comes on and the handset buttons illuminate.

Listen for the dialling tone.

KEYPAD Dial the number you want.

NOTE

If the call is not answered, it is returned to the original handset after 30 seconds. The original handset will ring to let you know if this has happened. To avoid having to wait 30 seconds for the call to be returned, you can press the TALK button to cancel the transfer of the call.

29

Page 33
Image 33
BT 1025 manual Transferring calls between handsets, Basic use of Freestyle additional handsets