BT 1025 manual Wall mounting

WALL MOUNTING

Wall mounting

Your Freestyle 1025 can be wall-mounted by using the bracket provided.

You can use the bracket as a template to mark where the screws should go into the wall.

Please refer to page 39, wall-mounting template.

Before you wall-mount your Freestyle 1025, check that:

•the wall can support the weight of the base unit and handset;

•the position you choose leaves enough space so that the base unit (which is larger than the bracket) is clear of any obstruction on the wall, such as a shelf or cupboard. Room should be left so that the handset can be placed on charge without touching any obstructions;

•the position leaves enough space for the aerial to be extended when wall-mounted.

For the best operating conditions, try to place the base unit away from large metal objects and other electrical appliances.

1Drill 2 holes for the screws and insert the wall-plugs provided (if required).

WALL PLUG	SCREW
WALL	102 mm

2Drive the screws into the wall, leaving about 4mm free on which to mount the bracket and base unit.

3Make sure that the power supply and the telephone cables are connected to the base unit, then fit the cables into the channels on the bottom of the base unit.

4Clip the bracket onto the base unit as shown on the next page.

5Attach the bracket and base unit by hooking them over the screws protruding from the wall.

38