BT 1025 manual To re-register an additional handset, To set the handset number

ADDITIONAL HANDSETS

NOTE

Your additional handset must be placed on the base unit within 5 seconds of the IN USE light flashing.

To re-register an additional handset

Before re-registering, the old registration code must first be erased. If necessary you can re-register your additional handset by simply following the above procedures.

NOTE

Check that your additional handset is registered correctly by pressing the TALK button and listening for a dial tone. If you do not hear a dial tone your additional handset is either out of range of the base unit or it has not been registered properly, or the base unit line cord is not plugged in.

To set the handset number

Each additional handset must be assigned an identity number (2, 3 or 4). Your Freestyle 1025 handset is already numbered as HANDSET 1. Additional handsets can then be numbered as they are added.

NOTE

Your Freestyle additional handset is pre-set

to handset number 2.

To set a handset identity number

Quickdial Press the QUICKDIAL button.

Secrecy Press the SECRECY button.

KEYPAD Enter the identification number (2-4)using the keypad.

Quickdial When you have entered the number,

press the QUICKDIAL button.

You will hear a beep confirming that the new number has been stored.

NOTE

Make a note of the identification number by writing

it on the handset’s directory label.

28