BT 1025 Registering your handset, To erase a registration code, To register an additional handset

Models: 1025

1 47
Download 47 pages 33.25 Kb
Page 31
Image 31

Freestyle 90/130/1025/1200 Additional Handsets

You can buy and use up to 3 Freestyle additional handsets with your Freestyle 1025 to extend your phone system, without needing to install extension sockets for each new phone.

To erase a registration code

Each additional handset is supplied with its own charger and user instructions, but the following information will tell you how to register and use an additional handset with your Freestyle 1025.

Registering your handset

You must register your Freestyle additional handset before it can be used with your Freestyle base unit. Make sure that each additional handset is registered with a different

Quickdial

Channel

Quickdial

Press and release the QUICKDIAL button.

Press and release the CHANNEL button.

Press the button four times.

Press and release the QUICKDIAL button.

You will hear a confirmation beep, the old registration code is now erased and you can re-register your additional handset following the procedure below.

ADDITIONAL HANDSETS

number (2, 3 or 4) so it can be identified from other additional handsets. See page 28.

To register an additional handset

NOTE

The following erasing and re-registering procedure can be used for either re-registering an original handset or registering an additional handset. If you wish to re-register please follow the instruction adjacent, using your original handset where it refers to additional handset.

Page

Place the handset you wish to register on the base unit and then remove it.

Press and hold the base unit PAGE button for 5 seconds.

As soon as the IN USE light begins to flash, release the PAGE button and place the additional handset on the base unit.

Your additional handset is registered automatically and you will hear a long confirmation beep and the IN USE light will stop flashing.

27

Page 31
Image 31
BT 1025 manual Registering your handset, To erase a registration code, To register an additional handset