BT 2000 user manual At the base station

To register your new handset

The handset must be switched OFF.

At the base station:

•Press and hold down the GREY paging button until you hear beep (after about 10 seconds).

You now have up to 1 minute to register the handset, during this period the beeps will continue.

At the handset:

1#

•Press and hold down the 1 button together with the PWR button, until the display shows 1–. This tells the base station that its base number is 1.

•Enter the 4 digit system code. (Standard setting 0000.)

•Press the # button. The beeps stop after about 10 seconds, and the display shows all the available handset numbers.

•Select and enter one of the available numbers. This is now the handset’s internal number and the handset is now registered with the base station.

If you experience any problems registering your handset using these instructions, please refer to your base station user guide. If you still experience difficulties, please phone the Diverse Helpline on 0345 908070 for assistance.

14