At the base station:
•Press and hold down the GREY paging button until you hear the beeps (after about 10 seconds).
You now have up to 1 minute to register the handset, during which the beeps will continue.
At the handset:
•Press and hold down the 2 button
(or 3 or 4), to allocate a number to the new base station.
•At the same time, hold down the PWR button until the display shows :
•Enter the system code (standard setting 0000.)
•Press the # button. The beeps stop after a few seconds, and the display shows all available handset numbers.
•Enter the single digit handset number
– from 2 to 6 – for the Additional Handset. It is now registered.
If six handsets are already registered with the base, three dashes will appear in the display after you enter the system code.
31
