BT Freestyle 250 – Issue 02 Ed 1 – 02.01.07 – 7971
8 | Getting started |
|
|
|
|
|
|
| Talk/Standby time | 2. | Batteries will come inserted in the battery compartment. Pull |
| Under ideal conditions, fully charged |
| the plastic tag as instructed to activate the batteries. |
| handset batteries should give about 10 |
|
|
| hours talk time or 100 hours standby | 3. | Place the handset on the base to charge the batteries for at |
| time on a single charge. | ||
|
| least 16 hours. | |
|
|
|
Battery low warning
If the 
symbol is flashing, you will need to recharge your handset before using it.
The main handset is
is fully charged the display shows the 
symbol.
Battery performance
To keep your batteries in the best condition, leave the handset off the base for a few hours at a time (after the initial 16 hour charge).
New NiMH batteries do not reach full capacity until they have been in normal use for several days. Running the batteries right down at least once a week will help them last as long as possible.
IMPORTANT
Only use the power supply and telephone line cord supplied with your BT Freestyle 250 otherwise the telephone may not work.
4.After 16 hours, connect the telephone line cord to the base and plug the other end into the wall socket.
Telephone line cord
Set the day and time
1.Press
2.Press press
Menu
Menu
to open the main menu.
or 
until the display shows Date/Time and
.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
