BT 250 manual Answer & Record, This invites your caller to leave a message, Answer Only

BT Freestyle 250 – Issue 02 Ed 1 – 02.01.07 – 7971

48 Answering machine

To set your answering machine to Answer & Record or Answer Only, see Set answer mode, page 50 .

To record a new Answer Only message you must first set up your answering machine to Answer Only, see page 50. Similarly, to record a new

Answer & Record message the answering machine must be set to Answer & Record.

Answer & Record

This invites your caller to leave a message.

The pre-recorded message is, “Hello, your call cannot be taken at the moment, so please leave your message after the tone”.

Answer Only

This does not allow your caller to leave a message.

The pre-recorded message is, “Hello, your call cannot be taken at the moment, and you cannot leave a message, so please call later”.

Record your own outgoing message

An Answer & Record message can be up to 2 minutes long. An Answer Only message can be any length depending on the amount of recording memory available.

1.Press Menu scroll to Ans. machine menu and press Menu .

2.Scroll or to Ans. settings and press Menu .

3.**Listen** will be displayed and you will be prompted to

enter 1 to hear the menu options.

4.Press to start to record your new message. Press to end recording and your new message will be played back to you.

5. Press and hold Clr to return to standby.

If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com