5980 BT Synergy 3205 UG [2-2] 23/3/04 2:08 pm Page 66
BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980
66 General information
Dialling mode
1.Press 
then scroll 
to SETUP and press 
.
2.Scroll 
to Dialling Mode and press 
.
3.Press 
or 
to select either Tone or Pulse and press 
to confirm.
4.Press and hold the 
button to return to standby.
Automatically insert a pause after access code
With some switchboards, you may be required to dial a pause after entering the switchboard access code (e.g. 9) to enable you to get an outside line.
This feature automatically inserts a pause between the access code and the telephone number you have entered in the phonebook. However, for this feature to work, you must still enter the access code before the telephone number when storing the number in the Phonebook.
1.Press 
then scroll 
to display Setup and press 
.
2.Scroll 
to display PABX Setup and press 
.
3.Scroll 
to Pabx 1 and press 
to display PIN Code?
4.Enter the PIN (original code 0000) and press 
.
5.Enter the switchboard access code (e.g. 9) and press 
. You can now choose the length of the pause – 3 or 5 seconds.
to 
.