Shortly, you will see the Ethernet LED blinking; this indicates that there is data traffic going through the PG902. You are now ready to start using your network.

How to use a power strip with the PG902

If you are planning to use a power strip we recommend that you plug the power strip in to the Powerline and not the Powerline into the power strip. If you must plug your adapter into a power strip, we suggest you use a basic power strip as the more advanced ones have a filter that can interfere with the Powerline signal.

AP/STBY

ETHERNET

STATUS

CONFIG

RESET

ON

STBY Powerline Ethernet

Adapter with Filter

AP/STBY

ETHERNET

STATUS

CONFIG

RESET

ON

STBY Powerline Ethernet

Adapter with Filte r

260072-

 

021_PG902_User_Guide(UK_A6 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2008/8/6 �� 10:44:49

Page 7
Image 7
BT manual How to use a power strip with the PG902