BT PARAGON450 INITIALISING

Check the dial mode setting
1. The switch on the underside of your BT Paragon 450 should be set to TB
for tone dialling. Pis for Pulse dialling which may be required if you are
connected to certain types of switchboard. See page 40-41.
Connect the power cord to the phone
1. Plug the power supply into a mains socket which is near the product and
is easily accessible and switch on.
Your BT Paragon 450 will start up automatically. The screen displays
INITIALISING . When ready, the display shows the time and number of
messages.
Getting started8
BT Paragon 450 – Edition 05 – 02.11.04 – 5995
HANDSET
LINE
9V DC
T
TB
HEADSET
MODE
P
T
TB
5995 BT Paragon 450 UG [5] 2/11/04 4:36 pm Page 8