AOSS
◗Now that the WBR2-G54S and wireless client adapter are installed, you can use AOSS to confi gure them.
◗To begin the confi guration, press the AOSS button on the back of the WBR2-G54S for 3-5 seconds. The AOSS light will begin to fl ash when the AOSS mode has been enabled. You can stop pressing the button at this point.
■NOTE: AOSS mode will stay active for a period of
two minutes. This is the time-slot required to initiate the wireless client adapter. The AOSS LED will stop fl ashing when AOSS mode has stopped or timed out.
◗Refer to your wireless client adapter's AOSS
supplement to initiate the wireless client adapter's AOSS mode.
◗It typically takes 10-15 seconds for the AOSS light to stop fl ashing after the AOSS button has been pressed on the wireless client adapter. Once confi guration is complete, the AOSS light will remain steady. Please refer to your wireless client adapter's supplement for the remainder of the setup.
