Buffalo Technology WBR2-G54S user manual Connection Type Select from

Advanced Settings

PPPoE Setting (for enabling PPPoE Client function) - Allows administrator to use PPPoE as specifi ed by the ISP.

The following parameters should be entered for PPPoE Settings:

Name of Connection - Enter the name of your connection.

User Name - Enter the user name (up to 64 alphanumeric characters) for PPPoE authorization.

Password - Enter the password provided by your ISP (up to 64 alphanumeric characters). Reenter the password in the Confi rmation box.

Service Name - Enter the PPPoE service name (up to 64 alphanumeric characters). If your ISP doesn’t require a service name, then leave it blank.

Connection Type - Select from:

-Continuous Connection - connects immediately after setting and never disconnects.

-Connect on Demand - Reconnects when the disconnect time elapses.

-Manual - Disables Automatic Connection. Connects to the Internet using the connect button on the initial settings page.

The Enter New Connection button will not appear until Use PPPoE Client is set.

Disconnection Time - Specify the number of minutes (0-1440) before automatic disconnect is performed. If “0” is entered, the disconnect function is disabled. If Continuous Connection is selected, the timer is disabled.

41