PROGRAMMING THE DISPENSER
Open the dispenser door to access the digital programming module with LED display. Two basic modes are available to the operator: Display Mode and Program Mode.
To enter the Display Mode, Set the RUN/NIGHT/PROGRAM Switch to the RUN position.
To enter the Program Mode, Set the RUN/NIGHT/PROGRAM Switch to the PROGRAM position.
Display Mode: Used to view the current
NOTE: The display blanks out after two minutes of inactivity. Press any button to activate the display.
LCD DISPLAY
1
8
0
MENU | (+) | ||||
|
|
|
|
|
|
0 | 1 | 1 | 8 | 0 | |
MENU | (+) | ||||
|
|
|
| ||
0 | 2 |
|
| 3 | 0 |
MENU | (+) | ||||
|
|
|
| ||
0 | 3 |
|
| 3 | 0 |
MENU | (+) | ||||
|
|
|
| ||
0 | 4 |
|
| 0. | 0 |
DISPLAY MODE | DESCRIPTION |
Home View | DisplaysTank Temperature. |
Tank Temperature | Displays target Tank Temperature (F°) |
Regular Dispense Ratio | Displays Left Dispense Ratio (XXX:1) |
Decaf Dispense Ratio | Displays Right Dispense Ratio (XXX:1) |
Cup Dispense Volume | Displays Cup Dispense Volume (XX.X |
| Oz.). Set to 0.0 for “Push and Hold” |
| Dispense Mode. |
MENU
0
5
0.
0
Carafe Dispense Volume | Displays Carafe Dispense Volume |
| (XX.X Oz.) |
MENU
12 | 38791 072307 |
|
