INTRODUCTION

The Liquid Coffee Ambient Dispenser delivers two types of coffee made from liquid concentrate plus hot water. The dispenser can be set up for continuous draw (by the cup) for self-serve applications, or portion- control to fill carafes and decanters for wait staff. Follow the Concentrate Manufacturer’s Storage and Shelf Life recommendations.

This dispenser is designed to operate when ambient temperatures are from 32°F (0°C) minimum to 104°F (40°C) maximum.

ELECTRICAL REQUIREMENTS

WARNING - If the power cord is ever damaged, it must be replaced by the manufacturer or its service agent with a special cord available from the manufacturer or its service agent in order to avoid a hazard.

The LCA-2 LP dispenser is supplied with a 120-volt / 15 Amp cord set and require a 2-wire, grounded, individual branch circuit rated for 120 volts AC, 15 amp, single phase, 60Hz. The mating connector must be a NEMA 5- 15R.

PLUMBING REQUIREMENTS

The dispenser may be connected to a cold or hot water system (140°F Max.) with operating pressure between 20 and 90 psi (138 and 620 kPa) from a 3/8” or larger supply line. A shut-off valve should be installed in the line before the dispenser. Install a regulator in the line when pressure is greater than 90 psi (620 kPa) to reduce it to 50 psi (345 kPa). The water inlet fitting is 1/4” flare. Dispensers set up to deliver to 50.0 ml/sec (1.7 Oz./sec.) and require a water supply source that can deliver a minimum of 1.0 gpm (3.8 lpm) at the inlet fitting.

NOTE: Bunn-O-Matic recommends 1/4” tubing from the 3/8” water supply line. At least 18 inches of FDA approved flexible beverage tubing, such as reinforced braided polyethylene or silicone, before the dispenser will facilitate movement to clean the counter top. It can be purchased direct from Bunn-O-Matic (part number 00326.0000). Bunn-O-Matic does not recommend the use of a saddle valve to install the dispenser. The size and shape of the hole made in the supply line by this type of device may restrict water flow.

As directed in the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Administration (FDA), this equipment must be installed with adequate backflow prevention to comply with federal, state and local codes. For models installed outside the U.S.A., you must comply with the applicable Plumbing /Sanitation Code for your area.

NOTE - Water pipe connections and fixtures directly connected to a potable water supply shall be sized, installed and maintained in accordance with federal, state and local codes.

BUNN recommends the use of our Easy Clear® Water Quality Systems to assure perfect taste.

Filter Kit - Easy Clear EQHP10L Bunn-O-Matic part no. 39000.0001

5

38791 060711

 

Page 4 Page 6
Page 5
Image 5
Bunn 38791.0000K service manual Introduction, Electrical Requirements, Plumbing Requirements
Page 4 Page 6

38791.0000K specifications

The Bunn 38791.0000K is an innovative coffee maker that has gained popularity among both home users and commercial establishments. Designed for those who appreciate efficiency and quality, this machine boasts a range of features that enhance the brewing experience.

One of the standout characteristics of the Bunn 38791.0000K is its high-capacity brewing system, which allows users to brew up to 3.8 gallons of coffee per hour. This rapid brewing capability makes it an ideal choice for settings that require a continuous supply of freshly brewed coffee, such as busy offices, cafes, and restaurants.

The coffee maker is equipped with a stainless steel water tank that maintains optimal brewing temperatures, ensuring that each cup of coffee is brewed to perfection. This consistent temperature control is crucial for extracting the full flavor from coffee grounds, resulting in a rich and aromatic brew every time.

Another key feature of the Bunn 38791.0000K is its patented brewing technology, which uses a pulse brew process. This method allows for adjustable brew times and water flow rates, giving users the flexibility to customize their brewing experience. Whether you prefer a strong, bold flavor or a milder brew, this technology caters to various taste preferences.

Additionally, the machine is designed for ease of use and maintenance. It features a simple interface, making it user-friendly for both novice and experienced coffee enthusiasts. The removable brew basket and easy-to-access water reservoir simplify cleaning and refilling, which is especially beneficial in high-demand environments.

The Bunn 38791.0000K is also equipped with a hot water faucet, allowing users to dispense hot water for tea or instant soups, further enhancing its versatility in any setting. This feature makes it a multi-functional appliance that can cater to various beverage needs.

Built with durability in mind, this coffee maker features a robust construction that withstands the rigors of daily use. Its stainless steel finish not only provides a sleek, modern look but also contributes to its longevity.

In summary, the Bunn 38791.0000K stands out in the realm of coffee makers due to its impressive brewing capacity, advanced technology, user-friendly design, and durability. Whether used in a home kitchen or a bustling cafe, it delivers coffee quickly and efficiently, ensuring satisfaction with every cup.
Top Page Image Contents