PROGRAMMING THE DISPENSER (Cont.)
Program Mode (Continued)
LCD DISPLAY
P 70.0
PROGRAM MODE | DESCRIPTION |
Right (Decaf) Dispense Total | Reset Total to Zero (00.0 Gal) |
MENU
P 860 0
MENU
P 9OFF
MENU
LC0xx
Empty Product Threshold | Set Conductance Threshold |
| Default = 600 |
| Range = 100 Min / 900 Max |
| To check Conductance of Hot Water, |
| view the display while rinsing. Set value |
| to 100 above reading. |
Rinse Alarm Timer | Default = OFF > Rinse Alarm Disabled |
| Range = 1 - 24 hrs |
| Reminder Only. No Lock Out. |
| To clear alarm, set to RINSE Mode. |
| Press Left switch, then Right switch |
| for 15 seconds each. |
| Displays Software Version # - |
| Exits To Home View After 3 Seconds. |
MENU
Program Lockout Function: The operator must hold down the stop and portion control button for 10 sec- onds while machine is in program mode. At 10 seconds, the machine's display changes from "PPP" to "PP LOC" indicating the locked position. At this point, the operator may view the setup functions, but not alter any of the parameters. In order to unlock the machine, repeat the aforementioned process. A MemoryLocked flag is set in eeprom so that the machine will retain this setting if power is lost.
LCD DISPLAY
PPLOC
PROGRAM FUNCTION | DESCRIPTION |
Function Lockout Feature | Prevents the user from changing |
| functions |
MENU
15 | 38791 063009 |
|