SERVICE (cont.)
SOLENOID (WATER) ON/OFF SWITCHES
| 1 |
| 2 |
| 3 |
| 1 |
| 1 |
| 2 |
2 | 3 |
| |
3 |
|
| P1521 |
FIG.18 SOLENOID (WATER) ON/OFF SWITCHES | |
Location:
The solenoid (water) ON/OFF switches are located on the switch mounting plate inside the autofill box on the right side.
Test Procedure:
1.Disconnect the dispenser from the power source.
2.Disconnect the wires from the switch to be test- ed.
3.Check for continuity across the terminals on the switch when it is held in the on position. Continuity must not be present across these terminals in the released position.
If continuity is present as described, refer to Fig. 19 and reconnect the wires to the switch.
If continuity is not present as described, replace the switch.
Removal and Replacement:
1.Remove the wires from the switch terminals.
2.Compress the clips inside the autofill box and gently push the switch through the opening.
3.Push the new switch into the opening and spread the clips to hold switch in the autofill box.
4.Refer to Fig. 19 when reconnecting the wires.
#1
BLK from Pump Switch #2
BLK to Pump Switch #1
BLU to Test/Operate Switch
BLU to to Solenoid #1
#2
BLK from Main ON/OFF Switch
BLK to Pump Switch #2
VIO to Test/Operate Switch
VIO to Solenoid #2
#3
BLK from Pump Switch #3
WHI/VIO to Test/Operate Switch
WHI/VIO to Solenoid #3
P1524
FIG. 19 SOLENOID (WATER) SWITCH
TERMINALS
17 | 41093 040408 |
|
