Bunn Axiom SET PULSE BREW ? NOYES DRIP TIME 0 30 DONE +, NO DONE YES EnableFreshTimer NO DONE YES

ADJUSTMENTS & OPTIONAL SETTINGS (CONT.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

"EASY PULSE BREW" times:

Min: Base brew time + 40 seconds

Max: Base brew time + 3:00 minutes

SET PULSE BREW ?

NOYES

DRIP TIME 0:30

(-) DONE (+)

ENABLE CLEAN

NO DONE YES

Enabl EnergySavr

NO DONE YES

EnableFreshTimer

NO DONE YES

This function allows the sprayhead to “pulse” on and off dur- ing a brew cycle. These times can be set two different ways. The first is by setting the total brew time in the "EASY PULSE BREW" screen. The other option allows the actual times to be entered in the "MANUAL PULSE BREW" screen.

NOTE: This will overwrite settings in "BREW METER".

Adjusts the DRIP TIME (time from end of sprayhead flow to when liquid stops dripping from the funnel). When the brew cycle is complete, the display will show "DRIPPING" and will countdown the time until the funnel empties.

RANGE: "OFF" or 0:05 to 4:00 minutes

Set the time before a cleaning alert will be displayed. RANGE: 1 to 30 days

Enables the mode function and sets the idle time.Then choose to have the tank heater(s) turn off, or reduce the tank temp to (140° F) or (60° C) once the set idle time has expired.

Range: 0.5 to 24.0 hrs

Enables the "FRESHNESS ALERT!" message and sets the expiration time. The expiration time is the amount of time the product is allowed to sit in the server before an alert message is displayed.

Range: 0.5 to 4.0 hrs

ENABL WARMER OFF NO DONE YES

Sets the amount of time a warmer will remain on after being turned on. Each warmer has an independent timer and is af- fected by its corresponding switch. NOTE: The lower "Brew" warmer timer is restarted when brew switch is pressed. Range: 15mins to 6.0 hrs in 15 min increments.

0REFILL 155

(-) DONE (+)

Adjusts the sensitivity of the refill circuit. Water in different geographical locations can have different conductivities. Make sure the water in the tank is touching the refill probe. NOTE: Always make sure that the # on the right is larger than the # on the left when water is contacting the tank refill probe.

Page 10 41154 041708