ADJUSTMENTS & OPTIONAL SETTINGS (CONT.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
NOTE: Access to the remaining functions in LEVEL 2 is intended for trained service personnel only. More in depth information can be found in the Axiom Service Manual 39132.0000
SET PASSWORD
0 0 0
SET LANGUAGE
NOYES
UNITS
METRIC DONE ENG
SET TEMP: 200°
SET READY: 195°
(-) DONE (+)
ENTER ASSET # ?
NOYES
Any 3 digit number may be programmed to prevent unauthor- ized access of LEVEL 2. BE CAREFUL TO USE A CODE YOU WILL
REMEMBER!
Choose between English or Spanish. After selecting "YES", press either ( + ) or ( - ) to select, then choose "YES" again when asked, "ARE YOU SURE?"
Choose between English or Metric units. Display will read:
"CHANGING UNITS WILL CAUSE" "ALL SETUP INFO TO BE LOST" "ARE YOU SURE?" "NO YES". NOTE: If the brewer is set for Metric Units, displays will be different. (ex: Brew oz will become Brew Liters, ° F will be ° C).
Adjusts brew tank temperature.
RANGE: (185 to 205° F) or (85 to 96° C)
This function sets the minimum temperature allowable to start a brew cycle. Range: (2° to 20° F) or (2° to 10° C) below the set temperature. The water must be at the "READY" temperature or higher for the display to indicate "READY TO BREW".
This function allows the you to enter in an optional asset num- ber. This can be useful for tracking the usage or service of an individual machine within a group.
Page 9 | 41154 041708 |
|
