SERVICE (cont.)

LAMP REPLACEMENT (Refer to Fig.24)(cont.)

9.Reconnect the plug on the door wiring harness to the connector on the door interconnect wiring harness.

10.Install the door lower panel (5) using four #8-32 screws.

LAMP STARTER and SOCKET (Refer to Fig. 24) Location:

The lamp starter (6) is located inside the door assy (1) on the top of the door lower panel (5).

Test Procedures:

1.Disconnect the dispenser from the power source.

2.Disconnect the starter leads from the door wiring harness.

3.Remove lamp starter from starter socket.

4.Check for continuity on each lead of the starter socket.

If continuity is present as described the starter socket is operating properly.

If continuity is not present as described replace the starter socket.

5.Remove starter (6) from starter socket.

6.Check for continuity across the pins on the bottom of the starter (6).

If continuity is present as described, replace the starter. If continuity is not present as described, starter is operating properly.

Note: If continuity tests are both as described and lamp does not light, replace the starter.

Removal and Replacement (Refer to Fig.24):

1.Open dispenser door assy (1)

2.Remove the four #8-32 screws securing the door lower panel (5) to the door assy (1).

3.Disconnect the leads on the starter socket from the door wiring harness.

4.Remove lower door panel (5) and starter w/socket

(6) as assembly.

5.Compress the spring tabs on the socket and re- move socket from the door bottom cover (5).

6.Rotate starter 90° and remove from the starter socket.

7.Insert new starter (6) into socket and turn 90° until the pins snap in place.

8.Install new socket by compressing spring tabs on the socket and pushing the socket up through the hole in the lower door panel (5) and releasing spring tabs.

9.Connect the sockets leads to the door wiring harness.

10.Install door lower panel (5) with starter and starter socket on door assy (1) using four #8-32 screws.

LEVEL CONTROL BOARD AND LEVEL PROBE - FMD-1 ONLY

P1665

FIG. 25 LEVEL CONTROL BOARD AND PROBE

Location:

The level control board is located behind the lower access panel mounted on the right side of the component bracket.

The Level probe is located on the left center of the tank lid just in front of the overflow tube.

29

29112 101598

 

Page 29
Image 29
Bunn FMD-2, FMD-1 service manual Lamp Replacement Refer to, Lamp Starter and Socket Refer to Location, As assembly

FMD-2, FMD-1 specifications

The Bunn FMD-2 is an advanced coffee dispensing machine designed for high-traffic environments, such as cafés, restaurants, and convenience stores. This commercial coffee equipment stands out for its reliability, efficiency, and user-friendly features, making it a preferred choice among coffee retailers.

A standout feature of the FMD-2 is its dual coffee bean hopper system, which allows for the storage and dispensing of two different coffee blends simultaneously. This versatility provides establishments the opportunity to cater to varying customer preferences, whether they prefer a robust espresso or a smooth medium roast. The hoppers can hold a significant amount of coffee beans, ensuring that the machine can keep up with high demand without the need for frequent refilling.

The FMD-2 incorporates state-of-the-art brewing technology, including the ability to brew coffee quickly while preserving the essential flavor characteristics of the beans. Its precision brewing process ensures consistency in taste and quality, which is crucial for customer satisfaction in a commercial setting. The machine is equipped with adjustable brew times and temperatures, allowing operators to fine-tune the brewing process according to specific coffee styles or customer preferences.

Another notable characteristic of the Bunn FMD-2 is its digital interface, which features an intuitive touchscreen display. This modern interface simplifies the operation of the machine, enabling baristas and staff to quickly train and adapt to its functionalities. The display provides real-time feedback on brewing status, maintenance reminders, and settings adjustments, making it easier to ensure optimal performance and reduce downtime.

In addition to its user-friendly design, the Bunn FMD-2 is constructed for durability. Its stainless steel exterior not only enhances its aesthetic appeal but also ensures that it can withstand the rigors of daily use in a bustling environment. The machine is designed with easy maintenance in mind, allowing for straightforward cleaning and servicing to keep it operating at peak performance.

Overall, the Bunn FMD-2 is a versatile, reliable, and innovative coffee dispensing solution that meets the demands of today’s coffee enthusiasts. With its dual hopper system, precision brewing technology, and user-friendly interface, it’s an ideal choice for any establishment looking to elevate their coffee offerings and enhance customer experience.