Bunn ICBC, ICBA, ICBB service manual User Notices

USER NOTICES

Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should be kept in good condition. Replace any unreadable or damaged labels.

This equipment must be installed to comply with the International Plumbing Code of the International Code Council and the Food Code Manual of the Food and Drug Adminis- tration (FDA). For models installed outside the U.S.A., comply with the applicable Plumbing /Sanitation Code.

#00656.0000

FOR USE ONLY ON AN

INDIVIDUAL BRANCH

CIRCUIT RATED 20 AMPS

#00985.0000

#03408.0000

#03409.0000

To reduce the risk of electric shock, do not remove or open cover.

No user-serviceable parts inside. Authorized service personnel only. Disconnect power before servicing.

#37881.0000

Risk of Fire. Use a UL listed grounding type attachment plug, rated 125/250 Vac, 30 A, 1 phase, 4 conductor. Plug to be selected and installed only by qualified service personnel.

38125.0000A 04/05 © 2005 Bunn-O-Matic Corporation

#38125.0000

PN: 00658.0000G 02/08 © 1985 BUNN-O-MATIC CORPORATION

#00658.0000

WARNING

•FILL WATER TANK BEFORE ENERGIZING

•DO NOT OVERLOAD CIRCUIT

•KEEP AWAY FROM COMBUSTIBLES

•DO NOT DEFORM PLUG OR CORD

SEE

INSTRUCTIONS

•FAILURE TO COMPLY RISKS EQUIPMENT DAMAGE, FIRE OR SHOCK

•BREWER ENERGIZED UNLESS UNPLUGGED

#06064.0000

120/208V

120/240V

120V

#34056.0001

WARNING

•DO NOT OVERLOAD CIRCUIT.

•ALWAYS ELECTRICALLY GROUND THE CHASSIS.

•DO NOT DEFORM PLUG OR CORD.

•FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES.

•KEEP COMBUSTIBLES AWAY.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE OR SHOCK HAZARD.

READ THE ENTIRE

OPERATING MANUAL BEFORE

USING THIS PRODUCT

00986.0000F 10/07 ©1994 Bunn-O-Matic Corporation

#00986.0000

!CAUTION

For 120/208V or 120/240 volt operation, replace Power Supply Cord only with Bunn-O-Matic part number 01699.0000.

#34072.0000

Optional Field Wiring

120/208-240 V, 13.8-16.8 A, 2900-4050 W

1PH, 3-Wire + GND, 60HZ

#29710.0011

Risk of Fire. Use a UL listed grounding type attachment plug, rated 125/208 Vac, 30 A, 1 phase, 4 conductor. Plug to be selected and installed only by qualified service personnel.

38125.0001A 04/05 © 2005 Bunn-O-Matic Corporation

#38125.0001

! WARNING

Incorrect programming could result in accidental dispens- ing of HOT LIQUID.

Trained personnel are to follow instructions provided for software programming.

Use of additional graphic layer requires disabling of appropriate switches.

Read all instructions for additional graphic layer prior to installing and programming.

39175.0000A 05/06 ©2006 Bunn-O-Matic Corporation

#39175.0000

Page 4 41581 120408