QUICK SETUP GUIDE - JDF-2S and JDF-4S (JDF-2S shown)
P3577 |
|
|
1. Install door cover by first plugging the |
|
|
door harness connector into the machine |
|
|
harness connector located at the bottom | 2. Install door cover. | P3578 |
of the machine door. |
| |
|
|
4. Place refrigeration switch in the OFF po- | 5. Connect water supply to machine. (See |
sition. | Plumbing Requirements) |
P3582 |
|
7. Install bath tank fill tube over a nozzle as | 8. Place the program switch in the ON po- |
shown.(See Initial Fill) | sition. |
10. Place the refrigeration switch in the 11. Insert juice containers as shown.P3591 ON position and the program switch in the
OFF position.
P3579
3. Secure the door cover using 5 screws provided.
P3588
6.Connect power supply to machine. (See Electrical Requirements)
P3589
9.Hold the dispense switch until water be- gins to flow into the tank (approx. 10 sec- onds). When tank is full, water will begin pour out of the overflow tube, Press the dispense button to stop the flow of water.
12.Proceed to page 7 in the Operating and Installation manual for calibration instruc- tions and charts.
28 | 44744 032811 |
|
