ELECTRICAL REQUIREMENTS

CAUTION - Do not connect the brewer to the power source until specified in Initial Set-Up.

L2 RED

200, 230 or

L1 BLACK

240V A.C.

MODELS OL15 & 20 require 2-wire, grounded service rated 120 volts ac, 15 or 20 amp re- spectively, single phase, 60 Hz.

MODELS OL35 & RL35 require 3-wire, grounded service rated 120/208 or 120/240 volts ac, 20 amp, single phase, 60 Hz.

MODELS OLA, RLA, OL35B & RL35B require 2-wire, ground- ed service rated 240 volts ac or 200 volts ac, 20 amp single phase, 50 Hz.

MODEL OL25B requires 2-wire, grounded service rated 100 volts ac, 20 amp single phase, 50 Hz.

CE REQUIREMENTS

•This appliance must be installed in locations where it can be overseen by trained personnel.

•For proper operation, this appliance must be installed where the temperature is between 5°C to 35°C.

•Appliance shall not be tilted more than 10° for safe operation.

•An electrician must provide electrical service as speci- fied in conformance with all local and national codes.

•This appliance must not be cleaned by water jet.

•This appliance is not intended for use by persons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowl- edge, unless they have been given instructions con- cerning use of this appliance by a person responsible for its safety.

•Children should be supervised to ensure they do not play with the appliance.

• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel with a special cord available from the manufacturer or its authorized service personnel in order to avoid a hazard.

• Machine must not be immersed for cleaning.

Electrical Hook-Up

Model OL15 has an attached cordset.

Models OL20, OL35, & RL35, proceed as follows:

CAUTION – Improper electrical installation will damage electronic components.

1.An electrician must provide electrical service as specified.

2.Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

3.Remove the top panel and rotate the control thermostat knob fully counterclockwise to the “OFF” position and replace the panel.

4.Remove the rear panel, feed the cord through the strain relief, and connect it to the terminal block.

5.Connect the brewer to the power source and verify the voltage at the terminal block before proceeding. Replace the rear panel.

6.If plumbing is to be hooked-up later be sure the brewer is disconnected from the power source. If Plumbing has been hooked-up, the brewer is ready for Initial Set-Up.

Page 4

32430 051512

 

Page 3 Page 5
Page 4
Image 4
Bunn RL00006929 service manual Electrical Requirements, Electrical Hook-Up
Page 3 Page 5

RL00006929 specifications

The Bunn RL00006929 is a commercial-grade coffee brewer that exemplifies innovation, efficiency, and durability, making it a preferred choice for coffee shops, restaurants, and large offices. This model is designed to meet high-volume demands while ensuring consistent quality and flavor in every cup.

One of the most notable features of the Bunn RL00006929 is its capacity to brew up to 3.8 gallons of coffee per hour. This remarkable output is facilitated by its dual-funnel design, which allows for simultaneous brewing, reducing wait times and enhancing service speed. The brewer is equipped with a precise temperature control system, ensuring that water is heated to the optimal brewing temperature of 200°F. This consistency in temperature plays a crucial role in extracting the full flavor profile from coffee grounds.

In terms of design, the Bunn RL00006929 boasts a compact footprint, making it suitable for various settings, including kitchens with limited space. The unit features a stainless steel construction, which not only provides a sleek appearance but also contributes to its durability and resistance to corrosion. Additionally, the easy-access design makes maintenance straightforward, allowing operators to clean and service the unit with minimal effort.

The RL00006929 incorporates advanced technologies that enhance its functionality. For instance, the machine features a digital control panel that provides real-time feedback on brewing status, water temperature, and other critical parameters. This intelligent system allows operators to make quick adjustments and ensures that brewing conditions are always optimal.

Another standout characteristic is the integrated brew basket that holds filters securely in place, preventing spills and ensuring a smooth brewing process. This feature minimizes mess and simplifies the coffee-making process, making it user-friendly for both experienced baristas and novice operators.

In summary, the Bunn RL00006929 stands out for its high brewing capacity, precise temperature control, compact design, and user-friendly features. Its combination of advanced technology and durability makes it an excellent investment for any establishment that demands quality coffee at high volumes. With Bunn's reputation for excellence, the RL00006929 is a reliable choice for delivering exceptional coffee experiences.
Top Page Image Contents