SERVICE (cont.)

Warmer(s)

OL: Brew Station & Upper

RL: Left Rear, Left Front, Brew Station, Right Rear & Right Front

FIG. 4 WARMERS

P1712

 

5.Check for continuity from the wire terminal of the white or red wire to the splice or indicator lamp using the chart below.

If continuity is present as described, proceed to #6. If continuity is not present as described, refer to the Wiring Diagrams and check the brewer wiring har- ness.

6.Check for continuity across the two terminals on the warmer.

If continuity is present as described, the warmer is operating properly.

If continuity is not present as described, replace the warmer.

Removal and Replacement:

1. Remove the #4-40 slotted-head screws holding the warmer to the brewer

2. Lift the warmer assembly from the brewer.

3. Disconnect both wires from the warmer.

4. Refer to FIG. 6 when reconnecting the wires.

5. Place the new warmer into the brewer and se- curely attach it using the #4-40 screws.

WHI or RED (see below)

BLK to Warmer Switch

FIG. 5 WARMERS

P1713

Location:

OL: One of the warmers is beneath the brew funnel and the other is on the top lid, FIG. 4.

RL: These warmers include the one beneath the brew funnel, the ones on the right and left of the brew station, and the one above and to the left and right of the brew station as viewed from the front, FIG. 5.

Test Procedure:

1. Once the switch has been tested and switch failure has been eliminated, proceed as follows.

2. Disconnect the brewer from the power source and remove the #4-40 screws attaching the warmer being tested.

3. Lift the warmer assembly from the brewer and invert the warmer making the wire terminals ac- cessible for testing.

4. Check for continuity from the switch to the black wire at the warmer element.

If continuity is present as described, proceed to #5.

 

 

 

 

 

P1692

 

 

FIG. 6 WARMER WIRING

 

 

 

 

 

 

MODEL

 

 

 

 

OL Upper

WHI OR RED

to Indicator Lamp

 

OL Brew Station

WHI OR RED

to Indicator Lamp

 

 

 

 

to Terminal Block

 

RL Left Rear

WHI OR RED

to Terminal Block

 

 

 

 

to Brew Station Warmer

RL Left Front

WHI OR RED

to Indicator Lamp

 

 

 

 

to Terminal Block

 

RL Brew Station

WHI OR RED

to Relay P2

 

 

 

 

to Left Rear Warmer

 

RL Right Front

WHI OR RED

to Right Rear Warmer

 

 

 

 

to Indicator Lamp

 

RL Right Rear

WHI OR RED

to Right Front Warmer

Page 15

32430 121699

 

Page 15
Image 15
Bunn RL00006929 service manual Service Warmers

RL00006929 specifications

The Bunn RL00006929 is a commercial-grade coffee brewer that exemplifies innovation, efficiency, and durability, making it a preferred choice for coffee shops, restaurants, and large offices. This model is designed to meet high-volume demands while ensuring consistent quality and flavor in every cup.

One of the most notable features of the Bunn RL00006929 is its capacity to brew up to 3.8 gallons of coffee per hour. This remarkable output is facilitated by its dual-funnel design, which allows for simultaneous brewing, reducing wait times and enhancing service speed. The brewer is equipped with a precise temperature control system, ensuring that water is heated to the optimal brewing temperature of 200°F. This consistency in temperature plays a crucial role in extracting the full flavor profile from coffee grounds.

In terms of design, the Bunn RL00006929 boasts a compact footprint, making it suitable for various settings, including kitchens with limited space. The unit features a stainless steel construction, which not only provides a sleek appearance but also contributes to its durability and resistance to corrosion. Additionally, the easy-access design makes maintenance straightforward, allowing operators to clean and service the unit with minimal effort.

The RL00006929 incorporates advanced technologies that enhance its functionality. For instance, the machine features a digital control panel that provides real-time feedback on brewing status, water temperature, and other critical parameters. This intelligent system allows operators to make quick adjustments and ensures that brewing conditions are always optimal.

Another standout characteristic is the integrated brew basket that holds filters securely in place, preventing spills and ensuring a smooth brewing process. This feature minimizes mess and simplifies the coffee-making process, making it user-friendly for both experienced baristas and novice operators.

In summary, the Bunn RL00006929 stands out for its high brewing capacity, precise temperature control, compact design, and user-friendly features. Its combination of advanced technology and durability makes it an excellent investment for any establishment that demands quality coffee at high volumes. With Bunn's reputation for excellence, the RL00006929 is a reliable choice for delivering exceptional coffee experiences.