SERVICE (cont.)

ON/OFF SWITCH (T3 W/OUT HALF BATCH) or SE- LECTOR SWITCH (T3 W/HALF BATCH and T6 BREWERS)(cont.)

T6 Brewers

1.Disconnect the brewer from the power source.

2.Remove the black wire from the top center switch terminal.

3.With a voltmeter, check the voltage across the black wire removed from the selector switch and the white wire or red wire on the tank heater.

4.Connect the brewer to the power source.The indi-

cation must be:

Removal and Replacement:

1.Remove the wires from the switch terminals.

2.Compress the clips inside the hood and gently push the switch through the opening.

3.Push the new switch into the opening and spread the clips to hold the switch captive in the hood.

4.Refer to FIG. 16 when reconnecting the wires.

a)120 volts ac for two wire 120 volt models.

a)240 volts ac for two wire 240 volt models.

b)100 volts ac for two wire 100 volt models.

5.Disconnect the brewer from the power source.

If voltage is present as described, proceed to #6.

If voltage is not present as described, refer to the Wir- ing Diagrams and check the wiring harness.

6. Check for continuity across the center and left or

WHI/VIO to Dilution

Timer TL1

WHI/VIO

WHI/VIO to Brew

Timer TL1

BLK to Power Cord (100V & 120V Models)

BLK to Power Connector (240V Models)

WHI to Dilution Timer TL2 (100V & 120V Models)

RED to Diltuion Timer (240V Models)

right terminals of the top row when the switch is

"ON" (left or right) position.

T3 BREWERS W/OUT HALF BATCH OPTION

BLK to Power Cord (100V & 120V Models)

BLK to Power Connector (240V Models)

If continuity is present as described, replace the wires, the switch is operating properly.

If continuity is not present as described, replace the switch.

7.Check for continuity across the left and center ter- minals in rows two, three and four with the switch in the "ON" (left or right) position.

WHI/VIO to Brew Timer TL1

GRY to Brew Timer

GRY to Dilution

Timer (Delay)

GRY to Dilution

Timer (Dilution)

WHI/VIO to Dilution Timer TL1

PNK to Brew Timer

PNK to Dilution Timer (Delay) PNK to Dilution Timer (Dilution)

T3 BREWERS W/HALF BATCH OPTION

If continuity is present as described, replace the wires. The switch is operating properly.

If continuity is not present as described, replace the switch.

WHI/VIO to Brew Timer TL1

WHI/BRN to Dilution Timer TL1

BRN/BLK to Left Dilution Solenoid

BLK to Power Connector (120V

Models)

BLK to Power Connector (240V

Models)

YEL to Right Dilution

Solenoid

WHI (100V & 120V

Models)

RED (240V Models)

T6 BREWERS

FIG.16 ON/OFF SWITCH TERMINALS

P1282

Page 25

10145

072600

 

 

Page 25
Image 25
Bunn T6A, T3A service manual On left or right position, Whi/Vio

T6, T6A, T3A specifications

The Bunn T6A, T3A, T6, and T3 are part of a distinguished line of commercial coffee brewers engineered for consistency, efficiency, and top-notch brew quality. These machines are well-suited for cafes, restaurants, and specialty coffee shops where reliability and performance are paramount.

The Bunn T6A is designed to brew large quantities, accommodating high-demand environments. With a capacity of six gallons per hour, this machine can quickly fulfill orders, ensuring that customers receive fresh, hot coffee without delay. It features a programmable touchpad that allows users to customize brew settings, enabling them to fine-tune extraction times and temperatures for various coffee blends. The T6A’s dual-float system provides precise water control, preventing overflow and enhancing safety.

The Bunn T3A is another exceptional model in this lineup, designed for both versatility and speed. It boasts a three-gallon capacity, making it ideal for medium-sized establishments. The T3A is equipped with Bunn's patented SplashGard funnel, which helps protect users from hot water splashes, providing an additional layer of safety. Its advanced brewing technology allows for an optimal brew temperature range, ensuring that coffee is extracted to perfection every time.

The Bunn T6 is similar to the T6A in its heavy-duty construction but focuses on a slightly different brewing capacity. Capable of producing back-to-back brews, the T6 can keep up with high-volume demands. This model features a digital brewer interface, making it user-friendly while providing detailed feedback on the brewing process. Its robust design allows for easy maintenance, ensuring it remains in peak operating condition.

Lastly, the Bunn T3 serves as a compact alternative in the series, suited for locations with limited space but requiring high-quality coffee. The T3 can brew up to three gallons per hour, seamlessly fitting into smaller setups without compromising on performance. Like its counterparts, it features programmable settings and quick brew times, providing flexibility and efficiency.

Together, the Bunn T6A, T3A, T6, and T3 represent a versatile range of commercial coffee brewing solutions. Each model is designed to deliver exceptional coffee, maintain consistent quality, and provide ease of use, making them integral tools for any serious coffee business. Whether high volume or limited space, Bunn caters to diverse needs while upholding the highest standards in coffee brewing technology.