Burley HD 4435/36/37 warranty VII. Hitching the Burley Cub to Your Bicycle, Shoulder Harness Pad

Shoulder Harness Pad

Insert the shoulder straps into the shoulder harness pad as shown in the drawing at right. The shoulder straps should be oriented so that the FLAT parts of the male buckles are facing toward each other.

VII. Hitching the Burley Cub to Your Bicycle

The trailer hitch was designed to quickly and safely attach to virtually all types of bicycles. It is inserted in front of the left rear dropout of your bicycle.

Hitching the Trailer to Your Bicycle

1.Loosen the knob on the eyebolt until the two arms are spread fully apart.

2.Slip the lower hitch arm under the chain stay (A) and the upper arm above the seat stay (B).

3.Wedge the hitch cone all the way back into the angle formed by the stays at the wheel.

4.Tighten the knob until the arms are firmly clamped against the stays. Wrap the safety strap around the inside of the chain stay, over the hitch body, and back to the D-ring at the end of the tongue.

B

A

Make sure that the cone is wedged securely into the stays. The knob should be finger-tight; do not overtighten. The hitch should not move, but should allow the bicycle complete movement, including lying it down on the ground. It should clear

13

Burley Cub Owner’s Instruction and Safety Manual