Burley HD 4435/36/37 warranty Parking Brake Installation and Operation, Installing the Cover

Installing the Cover

To install the cover, unfold it and snap the top two snaps first. Next, pull the cover toward the back of the trailer and snap the two rear snaps. Finally, using the B-tabs in front, pull the cover taut by snap- ping the B-tabs over the edge of the frame rails.

B-tabs

Folding and Stowing the Front Window

Folding and stowing the front window is quick and easy. Begin by unzipping the window. Next, fold the window in half toward the back of the trailer. Then roll the window up toward the top of the trailer. Hold the window in place by inserting the elastic straps into the Velcro holders on the top of the trailer.

Using the Adjustable Sunscreen

Your Burley Cub is equipped with an adjust- able sunscreen to keep your kids in the shade during bright, sunny days. To move the Adjustable Sunscreen, simply pull on the tabs to move it up or down on the trailer as neces- sary. If more visibility is required, pull the sunscreen up in the middle. This is depicted in the illustration at right.

Adjustable Sunscreen

Parking Brake Installation and Operation

The roll cage should be fully unfolded; remove the Big Screen 2-in-1 Cover; remove the tongue, and leave the wheels in running position.

1.Put the trailer on its nose on the floor with the roll cage leaning against a wall or table. If you are working on a rough or dirty surface, lay trailer on a cloth or other protective barrier.

2.Facing the underside of the bucket, identify the rear-most row of six molded depressions (see illustration on page 8). These depressions have 1/4” dimples molded into their centers.

7

Burley Cub Owner’s Instruction and Safety Manual