Burley HD 4485/86/87 warranty IV. Unfolding & Folding Your Burley Cub, Unfolding your Burley Cub

IV. Unfolding & Folding Your Burley Cub

Unfolding your Burley Cub

Your Burley Cub is designed with a durable polyethelyne bucket, lightweight alumi- num frame with roll cage, and bright-col- ored polyester software. Setting it up or folding it down is accomplished in a few easy steps as follows:

To unfold, rotate the front tube upward and the rear tube back until they meet on the two black plastic saddles as shown at right. Then rotate the two frame locks to snap onto the rear tube as shown. The frame locks should connect adjacent to, and to the outside of the two plastic saddles.

Frame Lock

Frame locks snapped into closed position onto rear tube.

Check that the frame locks are properly engaged before using trailer. Failure to do so can result in serious injury.

Installation and Use of the Cover

Your Big Screen 2-in-1 Cover is held in place by eight snaps at the rear, top, and two sets in the front. Always use your cover to keep debris out (and toys inside) of the trailer when it’s in use.

6

Burley Cub Owner’s Instruction and Safety Manual