2.Secure it and lock the pin by rotating it toward the rear of the trailer as shown in the drawing on the right.
3.Slip the safety pin though the forward hole in the tongue and lock in place. Refer to the illustra tion showing the locked position of the safety pin. Firmly pull on the tongue to ensure that it is secure.
Forward hole in tongue
| 2 |
3 | 1 |
|
Retaining Pin
Safety Pin
OPENLOCKED
Important: The tongue retaining pin is captured between the tongue receptacle and the lip of the poly shell. It should never be completely removed from the tongue receptacle.
Tongue retaining pin must be locked into place before using trailer. If pin is not properly locked, trailer could separate from bicycle, resulting in an accident or serious injury. Safety pin is a backup for the retaining pin. Under no circumstances should the trailer be towed with only the safety pin engaged.
Installing the Safety Flag
Insert the safety flag pole through the loop of ½” webbing on the outside of the trailer and into the flag pocket at the bottom left hand corner of the trailer as shown below. DO NOT USE YOUR TRAILER WITHOUT THE SAFETY FLAG IN PLACE.
5
Burley Cub Owner’s Instruction and Safety Manual
