Burners), hold for one (1) second and release to reset primary control.

3.On STEAM BOILERS:

a.With an L404A1354 - set cut-out pressure (MAIN scale) on the pressure limit for (2) PSI and differential pressure (DIFF. scale) below

(2) PSI. These pressures may be varied to suit individual requirements of the system.

b.With an L404A1651 or an L404F1367 - set cut- out pressure (MAIN scale) on the pressure limit for (1) PSI and differential pressure (DIFF.) for

.5 PSI. These pressures may be varied to suit individual requirements of the system.

4.On STEAM BOILERS WITH TANKLESS DOMESTIC WATER HEATERS, set boiler water temperature dial on L4006 operating control at 190°F (max.). Set differential at 10°.

5.On WATER BOILERS WITHOUT TANKLESS HEATERS, set high limit dial on L8148 at 180°F. This temperature may be varied to suit requirements of installation.

6.On WATER BOILERS WITH TANKLESS HEATERS, set operating control dial (low limit) on L8124 at 190°F and high limit dial at 210°F. Operating control (low limit) must be a minimum of 20° below high limit setting. Set differential at 25°.

E.ADJUST OIL BURNER BEFORE STARTING.

1.CHECK BURNER AIR BAND AND AIR SHUTTER, readjust if necessary, see Table 6 at rear of manual.

CAUTION

Air Band and Air Shutter are set for maximum input and must be readjusted for steam boilers or WM boilers, prior to starting burner.

2.Beckett Burners

a.Inspect Beckett head setting on left side of burner by insuring the blue line MD(V1) or the line on the label MB(L1) are aligned, readjust if necessary.

b.OPEN ALL OIL LINE VALVES.

c.Attach a plastic hose to fuel pump vent fitting and provide a pan to catch the oil.

d.OPEN FLAME OBSERVATION PORT COVER on burner swing door.

e.Beckett burners for boiler models V83 thru V86 are factory equipped with (2) nozzles for dual firing rates. On packaged boiler models PV83W thru PV86W, the higher firing rate nozzle is installed; on knockdown boiler models KV83W/ S thru KV86W/S both nozzles are shipped loose. Refer to Table 6 at the rear of this manual for

proper nozzle size, air settings and fuel pump pressure setting based on desired firing rate.

If the desired firing rate is the lower GPH:

1)replace the loose or factory installed high firing rate nozzle with the loose lower firing rate nozzle,

2)change the factory air settings according to Table 6 and,

3)reduce the oil pump pressure on models V83 and V86 to the pressure setting specified in Table 6, refer to Paragraph F for details.

3.Carlin 102CRD Burners

a.Inspect Carlin head setting on left side of burner by reading the scale embossed on the housing. Refer to Figure 7A and Table 6 of this manual.

b.OPEN ALL OIL LINE VALVES.

c.Attach a plastic hose to fuel pump vent fitting and provide a pan to catch the oil.

d.OPEN FLAME OBSERVATION PORT COVER on burner swing door.

e.Carlin burners for packaged and knockdown boiler models V87 thru V89 are provided with one nozzle, installed in the burner, that provides the same firing rate for both the steam and water boiler builds.

4.Carlin Elite EZ Burners

CAUTION

Air Band is set for maximum input and must be readjusted for steam boilers or WM boilers, prior to starting burner.

a.Inspect Carlin head setting on left side of burner to ensure that the proper head positioning bar matches the nozzle that is installed in drawer assembly. Replace bar if necessary.

b.OPEN ALL OIL LINE VALVES.

c.Attach a plastic hose to fuel pump vent fitting and provide a pan to catch the oil.

d.OPEN FLAME OBSERVATION PORT COVER on burner swing door.

e..Carlin burners for boiler models V83 thru V86 are factory equipped with (2) nozzles for dual firing rates. On packaged boiler models PV83W thru PV86W, the higher firing rate nozzle is installed; on knockdown boiler models KV83W/ S thru KV86W/S both nozzles are shipped loose. Refer to Table 6 at the rear of this manual for proper nozzle size, air settings and fuel pump pressure setting based on desired firing rate.

If the desired firing rate is the lower GPH:

1)replace the loose or factory installed high firing rate nozzle with the loose lower firing rate nozzle,

66

Page 65 Page 67
Page 66
Image 66
Burnham V8 Series manual Adjust OIL Burner Before Starting, Beckett Burners, Carlin 102CRD Burners, Carlin Elite EZ Burners
Page 65 Page 67

V8 Series specifications

The Burnham V8 Series is a prestigious line of oil-fired boilers renowned for their efficiency, reliability, and advanced design features. Tailored for residential and light commercial applications, this series exemplifies the perfect blend of tradition and modern technology, ensuring long-term performance and comfort for users.

One of the hallmark features of the Burnham V8 Series is its exceptional cast iron construction, which provides durability and superior heat retention. This robust design allows for an extended lifespan while ensuring that the boiler can withstand the rigors of daily use. The cast iron sections are engineered to facilitate optimal heat transfer and efficiency.

The V8 Series boasts an impressive fuel efficiency rating, often exceeding 85%. This high efficiency is achieved through a combination of advanced combustion technology and the boiler's thoughtful design, which minimizes heat loss. Users benefit not only from lower energy bills but also from a reduced environmental footprint, making the Burnham V8 Series a sustainable choice for heating solutions.

In terms of technology, the Burnham V8 Series features a standing pilot ignition system or an optional intermittent ignition device that enhances safety and efficiency. The advanced burner design allows for smooth operation and excellent fuel utilization, further contributing to the overall economy of the system.

Another notable characteristic is the versatility of the Burnham V8 Series. It can be easily adapted to work with various heating systems, including hot water heating applications. Its compatibility with different fuels, such as natural gas or oil, gives users the flexibility to choose the best energy source for their needs, providing longevity and value.

The installation process is made straightforward with ample connectivity options for plumbing and flue. Its compact design enables easier placement within homes or commercial spaces without compromising performance. Furthermore, the boiler is backed by extensive warranties, ensuring peace of mind for homeowners and businesses alike.

In conclusion, the Burnham V8 Series stands out as a reliable and efficient heating solution, blending robust construction with advanced technology. Its commitment to performance, versatility, and efficiency makes it an excellent choice for meeting the heating demands of various applications while promoting environmental responsibility. Whether for a single-family home or a light commercial building, the Burnham V8 Series remains a trusted leader in the industry.
Top Page Image Contents