PREPARATION
IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
PREPARINGYOUR LCD HDTV FOR WALL MOUNTING
We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference.
Before mounting your TV on the wall, you need to remove the base.
For your safety, please use listed wall mount bracket with minimum weight of the TV without stand. (Please see page.26.)
To attach a wall mount bracket to your TV:
1Loosen the screws holding your TV to the stand and remove the stand base from the TV.
2Secure the wall mount bracket to the back of your TV using four screws, as indicated in the illustration.
For 26" model
200 mm |
|
| M4 screws |
| |||
|
|
|
|
100 mm
For 32" model
200 mm
200 mm
For 42" model
NOTE
Wall mount bracket & screws are not included.
Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord!
1.Install the base stand; place the TV on a solid surface.
Min 1 m
Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing.
6 | BUSH HD Ready LCD TV User Manual Customer Helpline 0845 604 0105 |
