Bush Hog RMB 1445 10. OPERATING THE TRACTOR AND IMPLEMENT

OPERATION

RMB 1445 11/10 Operation Section 4-30

OPERATION

Start off driving at a slow speed and gradually increase your speed while maintaining complete control of the

tractor. Never operate the tractor at speeds that cannot be safely handled or which will prevent the operator

from stopping quickly during an emergency. If the power steering or engine ceases operating, stop the tractor

immediately as the tractor will be difficult to control.

Perform turns with the tractor and mower at slow speeds to determine how the tractor with an attached

implement handles a turn. Determine the safe speed to maintain proper control of the tractor when making

turns. When turning with the implement the overall working length and width of the unit is increased. Allow

additional clearance for the unit when turning or when passing large obstructions.

To avoid overturns, drive the tractor with care and at safe speeds, especially when operating over rough

ground, crossing ditches or slopes, and turning corners. Use extreme caution when operating on steep slopes.

Keep the tractor in a low gear when going downhill. DO NOT coast or free-wheel downhill. OPS-B- 0006_G

Never Leave the mower unattended while the head is in the raised

position. The mower could fall causing serious injury to anyone who

might inadvertently be under the mower (SBM-4)

Always keep a careful lookout and use extreme care when working

around overhead obstructions. Never allow the Mower head or boom

within 10 feet of any power line. When working close to overhead

power lines consult your electric company for a safe code of operation.

(SBM-7)

10. OPERATING THE TRACTOR AND IMPLEMENT

THE OPERATOR MUST COMPLETELY UNDERSTAND HOW TO OPERATE THE TRACTOR AND

IMPLEMENT AND ALL CONTROLS BEFORE ATTEMPTING TO OPERATE. The operator must read and

understand the Safety and Operation Sections of the implement and tractor operator’s manuals. These

manuals must be read and explained to any operator who cannot read. Never allow someone to operate the

implement and tractor without complete operating instructions.

Before starting any operation, the operator must become familiar with the area to be worked in and any

obstacles and hazards contained within to ensure safety to the operator, bystanders, and equipment. Special

attention should be paid to foreign debris, rough terrain, steep slopes, and passersby and animals in the area.

OPS-U- 0015