Bush Hog RMB 1445 6. PRE-OPERATION INSPECTION AND SERVICE

OPERATION

RMB 1445 11/10 Operation Section 4-11

OPERATION

Periodically inspect all moving parts for wear and replace when

necessary with authorized service parts. Look for loose fasteners, worn

or broken parts, and leaky or loose fittings. Make sure all pins have

cotter pins and washers. Serious injury may occur from not maintaining

this machine in good working order. (SG-21)

Never work under the Implement, the framework, or any lifted

component unless the Implement is securely supported or blocked up

to prevent sudden or inadvertent falling which could cause serious

injury or even death. (SG-14)

All Safety Shields, Guards and Safety devices including (but not

limited to) - the Deflectors, Chain Guards, Steel Guards,

Gearbox Shields, PTO integral shields , and Retractable Door

Shields should be used and maintained in good working condition. All safety

devices should be inspected carefully at least daily for missing or broken

components. Missing, broken, or worn items must be replaced at once to reduce

the possibility of injury or death from thrown objects, entanglement, or blade

contact. (SBM-18)

Use extreme caution when raising the Mower head. Stop the Blades from turning when the

Mower Head is raised and passersby are within 300 feet. Raising the Mower head

exposes the Cutting Blades which creates a potentially serious hazard and can cause

serious injury by objects thrown from the Blades or by contact with the Blades. (SBM-2)

6. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.

This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped

and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection

reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing

parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time

and repair cost can be avoided. OPS-U-0029