MAINTENANCE
RMB 1445 11/10 Maintenance Section 5-9
© 2010 Alamo Group Inc.
MAINTENANCE
HOSE CONNECTIONS

Main Control Valve

1. Supply
2. Return
3. Lift Base
4. Lift Gland
5. Reach Base
6. Reach Gland
7. Angle Base
8. Angle Gland
9. Breakaway Cylinder
PROPER TORQUE VALUES FOR FASTENERS
The chart lists the correct tightening torque for fasteners. When bolts are to be tightened or replaced, refer to
this chart to determine the grade of bolts and the proper torque except when specific torque values are
assigned in manual text.
RECOMMENDED TORQUE IN FOOT POUNDS UNLESS OTHERWISE STATED IN THE MANUAL*
NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine
oil. They do not apply if special graphitized or molydisulphide greases or other extreme pressure lubricants are
used. This applies to both UNF fine and UNC coarse threads.