INSTALLING THE BATTERIES AND SD CARD

Before you begin learning how to use your Trophy Cam, you will first need to install a set of batteries and insert an SD card. Although that may only take you a minute, there are some important notes about both batteries and SD cards you should be aware of, so please take the time to read the following directions and cautions:

Loading Batteries

After opening the two latches on the right side of the Trophy Cam, you will see that the Trophy Cam has eight or twelve battery slots, depending on your model. For maximum battery life, you should install a full set of batteries. The Trophy Cam may also be operated by just four batteries installed in the first slots only (starting on the top or left-see photos). Battery life will be shorter with 4 batteries, but the camera will operate normally. Whether you use 4 or a full set, be sure to insert each battery with correct polarity (negative or “flat” end against the long spring of each battery slot).

Bushnell recommends using a full set of new lithium

AA(Energizer® brand) or alkaline AA batteries. NiMh Rechargeable batteries are not recommended, as the lower voltage they produce can cause operational issues. It is also possible to use a lead-acid external battery cell with 6V output or suitable AC adapter-see below for more details.

Using an External Power Source (optional, user provided)

Optionally, you can connect an external 6V DC power source to the “DC In” jack at the bottom of the Trophy Cam. It is recommended to use a power source with a current output greater than 1550mA. However, during bright daytime operation when no flash is required, the Trophy Cam can function with much less current ( >400mA). Please use a compatible power source cable (not provided) to connect the external DC power source with the power input jack of the Trophy Cam, making sure that the polarity is correct. Note: The power connector is a 4.0x1.7mm coaxial DC power plug with positive “tip” (inside pin) polarity (Radio Shack P/N 274-1532 or equivalent).

8

Page 7 Page 9
Page 8
Image 8
Bushnell 119477, 119476, 119447, 119437 instruction manual Installing the Batteries and SD Card, Loading Batteries
Page 7 Page 9

119476, 119477, 119447, 119437 specifications

Bushnell has established itself as a leader in the optics industry, providing high-quality products that cater to outdoor enthusiasts, hunters, and wildlife watchers. Among its extensive range of game cameras, models 119437, 119447, 119477, and 119476 stand out for their innovative features and technologies.

The Bushnell 119437 is equipped with an advanced 20 MP resolution, delivering crisp and clear images even in challenging conditions. The camera boasts a unique Night Vision feature that captures exceptional nighttime images. With a trigger speed of 0.2 seconds, it ensures minimal delay in capturing fast-moving wildlife, making it an excellent choice for serious hunters and nature observers alike.

The 119447 model offers similar high-resolution capabilities but incorporates a wider field of view. This camera is particularly beneficial for monitoring larger areas, ensuring that no movement goes unnoticed. It also features the No Glow infrared technology, which provides a stealthy approach to photo capture without spooking the wildlife. This is an essential characteristic for anyone looking to observe animal behavior without interference.

In contrast, the Bushnell 119477 combines both performance and versatility. It features dual-image sensors that allow automatic switching between color daytime images and black-and-white nighttime images. Users will appreciate the adjustable trigger intervals and multiple detection zones, which enhance the camera's effectiveness in various environments. Additionally, its rugged design ensures durability in extreme weather conditions, making it ideal for long-term outdoor use.

Finally, the 119476 model prides itself on its exceptional battery life, making it suitable for extended periods of deployment without frequent maintenance. It also supports video recording, making it a versatile tool for capturing both high-quality images and videos of wildlife in action.

These Bushnell game cameras are equipped with user-friendly interfaces, allowing for easy setup and configuration. They also often support mobile alerts, enabling users to receive updates directly on their devices. With features like time-lapse mode and compatibility with multiple SD card sizes, all four models represent the forefront of imaging technology, offering outdoor enthusiasts an invaluable tool to enhance their wildlife monitoring and hunting experiences. Whether for professional or recreational use, Bushnell’s offerings ensure high performance and reliability in the field.
Top Page Image Contents