APPENDIX

4.Enter the PIN of the Wireless VGA Adapter (4-digit PIN) and click Accept Association. The Wireless VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation.

PIN CHANGE PROCEDURE

The default PIN setting for the Wireless USB Hub is “1234”. This section gives you the instructions to change the PIN to another 4-Digit value.

IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.

1.Make sure your Wireless USB Host Adapters and the Wireless USB Hub Adapter are not connected to your computer.

2.Open/Launch the application “Pin Update” (C:\Program Files\Wireless USB Manager\Utility\PINUpdate). The following dialog will appear:

30

Page 30 Page 32
Page 31
Image 31
Cables to Go 29571, 29570 manual PIN Change Procedure
Page 30 Page 32
Top Page Image Contents