Operation 11
Hold (2704 and 2705 models)
To place a call on hold:
Press the HOLD button (the Line indicator will illuminate red for
that line).
To retrieve a call from hold:
1. Lift the handset or press the SPKR button on your telephone or
an extension telephone.
2. Press the line button where the call is on Hold (Line indicator
will turn green).
Message Waiting Indicator
If you have telephone messaging service the MSG lamp will
illuminate to indicate a message is waiting. Information regarding
the availability and operation may be obtained through your
service. (Message Indicator requires 70-volts DC.)
Two-Line Models (2704/2705)
The MSG lamp will illuminate for messages on LINE1 only.
Flash
The Flash feature allows you to access features available through
Custom Calling services. Flashes may be stored in the telephone
memory.
Press the FLASH button while on a call to generate a flash.
If the call was placed on HOLD without hanging up the handset,
after 30 seconds the call is re-connected to the phone in the MUTE
state. You must press the MUTE button to resume conversation.