Cabletron Systems 6000 manual Refer to the Local Management

Using LANVIEW

Table 4-1 LANVIEW LEDs CPU, Receive, and Transmit Status (Continued)

LED Color State Recommended Action

TX	Off	Port enabled, and no activity.
		Should flash green every two
		seconds indicating BPDUs
		being sent if STA is enabled
		and there is a valid link.

1.Ensure that the STA is enabled and that there is valid link. The Local Management User’s Guide describes how to enable the STA.

2.Contact Cabletron Systems.

Green	Flashing. Indicates activity.	None.
	Rate indicates data rate.
Amber	Blinking. Port in standby. Port	1. Ensure that the port is not disabled.
	may be disabled due to	Refer to the Local Management
	Spanning Tree.	User’s Guide for information on
		enabling/disabling ports.
		2. Contact Cabletron Systems.
Red	Flashing. Indicates collision	None, unless there is a high rate of
	rate.	activity. If so, check for network
		configuration problems or a defective
		device.
	Solid. Diagnostic Failure.	Contact Cabletron Systems.

4-4Troubleshooting