Cabletron Systems 6000 manual B.3.2 Installing the DRAM SIMM

SIMM Upgrade

B.3.2 Installing the DRAM SIMM

!

Observe all antistatic precautions when handling sensitive electronic equipment.

CAUTION

To install a DRAM SIMM, refer to Figure B-3and proceed as follows:

1.With the SIMM alignment notch oriented as shown in Figure B-3, insert the SIMM down between the connector teeth.

2.Pivot the SIMM downward so the connector clips align with the two side notches of the SIMM and the connector clips lock the SIMM into place.

Connector

Clip

Side Notch

2

Connector

Teeth

1

Clip

Alignment Notch

SIMM Side Notch 2504-91

Figure B-3 Installing the DRAM

B-4Optional Installations and Mode Switch Bank Settings