Cabletron Systems 9A426-02 manual Switch Function Description

Preparing and Installing the 9A426-02 Module

Table 2-1. Function of DIP Switch

!

CAUTION

Switch	Function	Description
		When toggled, this switch clears user-entered
	Clear	passwords stored in NVRAM, and restores the
8		default passwords. Once the passwords are
	Password 1
		reset, you can use the defaults or enter new
		passwords.
		The module uses NVRAM to store user
		entered parameters such as IP addresses,
	Clear	device name, etc. To reset these parameters to
7		the factory defaults, toggle this switch. Once
	NVRAM 2	reset you can use the defaults or enter new
		parameters which are stored in NVRAM when
		the module is powered down, and remain
		there until the switch is toggled again.
		Toggling this switch after pulling the board out
		of the SmartSwitch 9000, clears download
	Force BootP	information from NVRAM and forces image
6		files to be downloaded from the station
	Download
		connected to the EPIM on the Environmental
		Module configured to act as that module’s
		BOOTP server.
5	Reserved	For Factory Use Only
4	Reserved	For Factory Use Only
3	Reserved	For Factory Use Only
2	Reserved	For Factory Use Only
1	Reserved	For Factory Use Only

1Do not toggle Switch 8 unless you intend to reset the user configured passwords to their factory default settings.

2Do not toggle Switch 7 unless you intend to reset the user parameters to the factory default settings.

2-11