Cabletron Systems manual Preparing and Installing the 9A426-02 Module

Preparing and Installing the 9A426-02 Module

2.Attach one end of the ESD wrist strap packaged with the SmartSwitch 9000 chassis to your wrist. Plug the other end into the ESD Wrist Strap Grounding receptacle in the lower right corner of the SmartSwitch 9000 Chassis shown in Figure 2-11.

3.Grasp the module and slide it into the slot.

Make sure that the module’s circuit card is between the card guides, as shown in Figure 2-11. Check both the upper and lower tracks of the card. Take care that the module slides in straight and engages the backplane connectors properly.

4.Lock down the top and bottom plastic tabs, as shown in Figure 2-11.

2-16