Cabletron Systems 9F106-01 manual Local Management Console

Local Management Console

An RJ-45 connector provides a CON interface to the management terminal. Figure 2-3shows the pinouts.

Pin 1

RJ-45 CON PORT

RECEIVE

TRANSMIT

SIGNAL GROUND

DATA SET READY

DATA TERMINAL READY

4

1

5

2

6

RJ-45 TO 25 PIN		FEMALE - 25 Pin
CABLE		"D" Shell Connector
	2	TRANSMIT
	3	RECEIVE
	7	SIGNAL GROUND
	20	DATA TERMINAL READY
	5	CLEAR TO SEND

CON PORT	LOCAL MANAGENT
RJ-45
	CONSOLE

TRANSMIT

RECEIVE

SIGNAL GROUND

DATA SET READY

DATA TERMINAL READY

1	2	RECEIVE
4	3	TRANSMIT
5	5	SIGNAL GROUND
2	7	READY TO SEND
6	8	CLEAR TO SEND

RJ-45 TO 9 PIN	FEMALE - DB-9
	(9-Pin Connector)
CABLE

Figure 2-3. Console Cable Pinouts

Connect the console to the module as follows:

1.Attach the male RJ-45 connector to the CON port of the 9F106-01.

2.Attach the female end (25-pin or 9-pin, as applicable) to the terminal.

Refer to the Cisco Systems documentation for information on configuring this module.

2-5