Cabletron Systems CSX200 manual Attaching the Strain-Relief Bracket

Chapter 4: Installation

Materials Required

The following parts are included in the CSX200-ACCY-KIT.

•Strain-relief bracket (shown in Figure 4-6, on the following page)

•Left and right rackmount brackets (shown in Figure 4-7, on the following page)

•8-32 x 1/4-inch, pan-head screws (4)

•8-32 x 3/8-inch, pan-head screws (4)

Do not use any screws other than those supplied with the CSX200-ACCY-KIT to perform

!the following procedures.

CAUTION

Rackmount

Brackets (2)

Strain-Relief Bracket

2012_12

Figure 4-5 CSX200 Rackmount Hardware

Attaching the Strain-Relief Bracket

Attach the strain-relief bracket to the front of the CSX200 as follows:

•Locate the strain-relief bracket and four 8-32 x 3/8-inch, pan-head screws provided in the CSX200-ACCY-KIT.

•Using the four 8-32 x 3/8-inch, pan-head screws, attach the strain-relief bracket to the bottom of the CSX200 as shown in Figure 4-6, on the following page.

4-8 CSX200 Installation Guide