Cabletron Systems CSX200 manual To install a WPIM, follow these instructions

Chapter 4: Installation

WPIM Screws

WPIM

Connector

WPIM

WPIM

Connector Pins

Standoffs

Figure 4-2 Installing WPIMs

To install a WPIM, follow these instructions:

•Attach the disposable grounding strap to your wrist (refer to the instructions outlined on the disposable grounding strap package).

•Remove the CSX200 cover (see Removing the CSX200 Cover on page 4-2).

•Remove the blank faceplate from the appropriate WPIM slot.

•Orient the WPIM as shown in Figure 4-2, above, and carefully insert the WPIM connector into the WPIM connector pins on the CSX200.

•Press down firmly on the WPIM until the pins slide all the way into the connector. Ensure that the WPIM seats flush on the standoffs.

•Secure the WPIM to the three standoffs using the screws supplied.

•Replace the CSX200 cover.

4-4 CSX200 Installation Guide