Getting Started  21

1.2  Installing the Battery, Storage Card, and SIM Card

You need to remove the back cover before you can install the battery and storage card, or replace the pre- installed SIM card on your phone. Also, make sure to always turn off the power before installing or replacing a SIM card and battery.

Toremovethebackcover

1.Hold the phone securely with both hands and the front facing down.

2.Push the back cover up with your thumb until it disengages from

the phone and then slide it up to remove.

Battery

Your phone comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer- specified original batteries and accessories. Battery performance depends on many factors, including but not limited to your wireless service provider’s network configuration, signal strength, and the temperature of the environment. For battery life estimates, see “Specifications” in the Appendix.

WARNING!  To reduce risk of fire or burns:

Do not attempt to open, disassemble, or service the battery pack.

Do not crush, puncture, shorten external contacts, or dispose of in fire or water.

Do not expose to temperatures above 50˚C (104˚F).

Replace only with the battery pack designated for this product.

Recycle or dispose of used battery as stipulated by local regulation.

To install the battery

1.Remove the back cover.

2.Align the exposed metal contacts on the edge of the battery with the battery connectors inside the battery compartment.

3.Insert the contacts side of the battery first and then gently push the battery into place.

4.Replace the back cover.

Battery connectors

Page 21
Image 21
HTC CEDA100 user manual Installing the Battery, Storage Card, and SIM Card, Toremovethebackcover, To install the battery