CSX400 Configuration with QuickSET
94 CSX400 and CSX400-DC User’s Guide
Table 18 shows the line configuration information normally determined by your wiring provider.
The CSX400 factory default setting is in bold.
This section describes the fields in the Wide Area HDSL configuration window.
HDSL Transmit Clock Source — Displays the HDSL Transmit Clock Source. Click on the radio
button to select either the Slave or Master option. The default setting is Slave.
Protocol — Displays the active protocol for the HDSL WAN port. The selections for this field are
either HDLC or Point-to-Point (PPP). The default setting for this field is PPP.
Once the Wide Area HDSL configuration is complete, click on the Next>> button, and go to the
Wide Area HDSL Time Slot Configuration Window section.
Table 18 Telco Configuration Information
Configuration Information
Required by User Configuration Information
Supplied by Service Provider
HDSL Transmit Clock Source Slave or Master