Installation

CSX-COMP/ENCR Installation

This section contains instructions on how to install the CSX-COMP/ENCR into the CSX400 motherboard. To help eliminate any potential problems during or after installation, read and understand all of the following steps:

1.Attach one end of the antistatic wrist strap to your wrist and the other end to an approved electrical ground.

2.Unpack the CSX-COMP/ENCR by carefully removing it from the shipping box and then from the protective plastic bag. Do not cut the bag as the device could be damaged. If there are any signs of damage, contact the Cabletron Systems Global Call Center (refer to the Getting Help section).

3.Power down the CSX400 before you install the CSX-COMP/ENCR.

4.Remove the chassis cover of the CSX400 or CSX400-DC to install the CSX-COMP/ENCR (refer to Removing the CSX400 Cover, on page 58 or Removing the CSX400-DC Cover, on page 59).

NOTE

The motherboard of the CSX400 has two D-Type connectors. Use the left-most connector (as you are facing the front of the chassis). Ensure the CSX-COMP/ENCR is aligned such that its connector pins correctly align with the D-Type connector on the chassis or module.

5.Locate the D-Type connector and the standoffs on the CSX400 (refer to Figure 14).

6.The D-Type connector pins of the CSX-COMP/ENCR only fit one way onto the CSX400 D-Type connector. Lower the CSX-COMP/ENCR onto the standoffs and align the connector with the connector pins. Carefully insert the connector pins of the CSX-COMP/ENCR into the CSX400 connector.

7.Press down firmly on the CSX-COMP/ENCR until the pins fit all the way into the connector.

8.Secure the CSX-COMP/ENCR with the standoff screws supplied with the CSX-COMP/ENCR. The CSX-COMP/ENCR installation is complete.

62

CSX400 and CSX400-DC User’s Guide

Page 75 Page 77
Page 76
Image 76
Cabletron Systems CSX400-DC manual CSX-COMP/ENCR Installation
Page 75 Page 77

CSX400-DC, CSX400 specifications

Cabletron Systems was a leading developer of networking solutions, and its CSX400 and CSX200 series of high-performance switches represent some of the key innovations in the field of enterprise networking during their time. Both models were geared towards enhancing network reliability, efficiency, and speed, particularly in environments where heavy data traffic and complex networking demands were prevalent.

The CSX400, designed for larger enterprises, boasts a robust architecture capable of handling significant throughput. One of its standout features is its stackable design, allowing multiple switches to be interconnected and managed seamlessly as a single unit. This scalability provides organizations with the flexibility to expand their networks without significant infrastructure overhauls. The CSX400 supports various Ethernet standards, including 10/100 Ethernet and Gigabit Ethernet, positioning it to effectively manage both legacy and modern networking requirements.

In addition to its scalability, the CSX400 is distinguished by its advanced Layer 2 and Layer 3 routing capabilities. This dual-layer functionality enables efficient data handling and is instrumental in managing traffic between different network segments. Moreover, the switch incorporates features like VLAN (Virtual Local Area Network) support and Quality of Service (QoS) prioritization, allowing for enhanced performance of critical applications and streamlined bandwidth allocation.

On the other hand, the CSX200 series is tailored for smaller enterprises or branch offices needing a reliable yet efficient networking solution. Despite its compact design, the CSX200 is equipped with essential features that promote effective network management and security. It offers a simplified management interface, making it user-friendly for network administrators. The switch also provides essential access control measures, employing technologies like IEEE 802.1X for network access security.

Both the CSX400 and CSX200 prioritize performance through the incorporation of advanced switching technologies. They support features such as Spanning Tree Protocol (STP), enabling loop-free topologies and enhanced network resilience. These attributes are particularly crucial in dynamic networking environments where downtime can have significant repercussions on business operations.

Overall, Cabletron Systems' CSX400 and CSX200 series represent a blend of scalability, advanced routing capabilities, and user-friendly management, making them vital assets for organizations looking to optimize their network infrastructure during a period of rapid technological evolution. With their rich feature sets and unwavering performance, these switches helped pave the way for modern networking solutions that cater to diverse enterprise needs.
Top Page Image Contents