CSX400 Configuration with QuickSET
CSX400 and CSX400-DC User’s Guide 75
This section describes each of the fields on the Ethernet 1 and 2 configuration window.
Local Ethernet 1 IP Address — Displays the IP address for Ethernet interface 1. Place the
cursor in this field and type the preferred IP address in Dotted Decimal Notation (DDN) format.
The IP address must be entered in this field to continue.
Local Ethernet 1 Subnet Mask — The Subnet Mask takes the same form as an IP address; four
groups of three decimal digits, separated by periods. Each group must be in the numerical range of
0 to 255. The first time you use QuickSET, the Subnet Mask field displays a default Subnet Mask,
based on the IP address entered, when it is clicked on. If you wish to use a different Subnet Mask,
enter it at this time in DDN format. A Subnet Mask must be entered in this field to continue.
Local Ethernet 2 IP Address — Displays the IP address for Ethernet interface 2. Place the
cursor in this field and type in the preferred IP address in DDN format.
Local Ethernet 2 Subnet Mask — Displays the Subnet Mask for Ethernet interface 2. Place the
cursor in this field and type in the Subnet Mask in DDN format. The first time you use QuickSET,
the Subnet Mask field displays a default Subnet Mask, based on the IP address entered, when it is
clicked on. If you wish to use a different Subnet Mask, enter it at this time, and type the Subnet
Mask in DDN format. A Subnet Mask must be entered in this field to continue if an IP address is
entered for the Local Ethernet 2 interface.